PROTECTION from the roughest TREATMENT

High impact Corner Guards protect exposed and vulnerable corners from the roughest treatment. High impact Corner Guards are furnished with .080 inch thick vinyl covers that are mounted on .080 inches thick aluminum retainers. End Caps are molded from .100 inch thick ABS. UL approved.

Design features:

• Offers protection from damage and wear at corners from carts, beds, wheelchairs or hand held items carelessly brushed against the corners.      
• Available in the 100 series, with 2" x 2" wings and 90 degree corners, 110 series with 3"x 3" wings and 90 degree corners and 120 series with 3" x 3" wings and 135 degree corners. Impact resisting PVC cover has an attractive textured finish that protects the corners from gouges, scratches and scuffs.      
• Installs easily by snapping the vinyl cover over the aluminum retainer.     
• For maximum impact resistance, a firmly held PVC impact absorber is inserted in the aluminum retainer. The absorber runs the entire length of the corner, increasing strength and preventing damage to the corner.      
• Corner guards are provided in 8 foot lengths.      
• ABS end caps, in matching textured finish, create a consistent and finished look at either end of the corner guard.

Where used:

Tepromark High Impact Corner Guards are installed at corners that would be damaged by moving objects that result in gouges, scratches and scuffs.

• Interior walls and partitions.
• Door Frames.       
• Rectangular columns.       
• Service counters.       
• Displays, cabinets and plinths used in retail stores, hotels, etc.

System components:

100-01 - Aluminum Retainer 2" x 2" x 90 degrees - Profiled aluminum extrusion over which the vinyl cover is mounted. Standard length is 8 feet. Also available in 4' and 12'.

110-01 - Aluminum Retainer 3" x 3" x 90 degrees - Profiled aluminum extrusion over which the vinyl cover is mounted. Standard length is 8 feet. Also available in 4' and 12'.

120-01 - Aluminum Retainer 3" x 3" x 135 degrees -Profiled aluminum extrusion over which the vinyl cover is mounted standard length is 8 feet. Also available in 4' and 12'.

100-02 - Impact absorber - extruded PVC profile designed to mount in an aluminum retainer, standard length 4ft and 8 ft. Also available in 12'. Use only on the 110 and 120 parts.

100-03 - Vinyl cover - 2"x 2" x 90 degrees - extruded textured PVC profile designed to mount over an aluminum retainer

110-3 - Vinyl cover 3" x 3" x 90 degrees - extruded textured PVC profile designed to mount over an aluminum retainer

120-3 - Vinyl cover 3" x 3" x 135 degrees - extruded textured PVC profile designed to mount over an aluminum retainer

100-04 - End cap 2" x 2" x 90 degrees - molded textured ABS

110-04 - End cap 3" x 3" x 90 degrees - molded textured ABS

120-04 - End cap 3" x 3" x 135 degrees - molded textured ABS

Colors:

click to view color chart


Installation:

Each order is shipped with a complete Installation Guide that outlines step by step installation procedures. Guides are available at any time by calling or e-mail.

Ordering Information:

Any quantity will be shipped in "Quick Ship" Program colors. Other colors in the standard palette for less than 1000 feet there will be a set-up charge. Colors available are shown. Any color will be matched with an order of 2500 feet or more. There will be a surcharge for orders less than 2500 feet.

Technical Data:

Click here to view the technical data cover this product